# Using KVG (Kernel Version Generator)
Using KVG is very simple, all you need to know is if your device has v0 or v1.

This can be figured out very easily, if your device is oldui (white mode) recovery, then its v0,

if your device is newui (dark mode) recovery, then its v1.<br><br>

CLI Args:
```
$ ./kvg
USAGE: ./kvg <kernver> <optional flags>
e.g.: ./kvg 0x00010001 --raw --ver=0
--raw - prints the output as raw hex bytes
--ver=<0/1> - specifies the kernver struct version to use
--help - shows this message
KVG was created by kxtzownsu
(now written in Rust)
$
```

To use V0 recovery, pass `--ver=0` onto the END of the command, after putting the binary,

pass your flags, like this:

`./kvg 0x00010001 --ver=0 --raw`

NOT like this:

`./kvg --raw --ver=0 0x00010001`

Passing `--raw` will give you the raw hex output, instead of it printing like this `02 4c` it would print `\x2\x4c`.

# Using KVS (Kernel Version Switcher)
you MUST be unenrolled!! 

## Examples:
***Flashing via tpm0 flash***
```
KVS: Kernel Version Switcher (codename Maglev, bid: 2.0.0))
FW Version: Google_Grunt.11031.149.0
Kernel Version: 0x00010001
TPM: 2.0
FWMP: 0x1
GSC RW Version: 0.5.229
GSC Type: Cr50
-=-=-=-=-=-=-=-=-=-=-=-=-
1) Flash new kernver
2) Run KAUB
3) Kernver FAQ
4) Credits
5) Shell
6) Reboot
> 1
What kernver would you like to flash?
> 0x00010001
Press ENTER to return to main menu
```